premium carpet topped
» Care Guide
» Safety Rating
25 Pieces - Each 24" x 24"
23 Border pieces included
Thickness: 3/8" (10mm)
Hardness: 40 - 45
Solid Color EVA Foam
Finished on top side with carpet material, back side is smooth raw cut foam. it can be used but may have imperfections
Easy to Clean & Waterproof
Non-Toxic & Safe
Lightweight & Durable
Industrial Strength & Flexible
Shock & Impact Absorbing
Our dense foam mats have a one year normal limited warranty against manufacturing defects under normal daily use, excludes outdoor applications. If mats are thought to be deteriorating under normal use within the warranty period, please contact our customer service. The nature of EVA of foam allows for some expansion and contraction and slight color variations. Due to this, we cannot accept returns for color and thickness variations unless the tiles are off more than 2mm in thickness or if colors are substantially different. Prior to sending any replacement products we do require a digital picture be emailed to us showing the issues for us to review. It is typically not necessary to send the product back for review.
Products deemed defective from manufacturing issues will be replaced or refunded per management discretion working with the customer.
Easy to clean, EVA foam can be cleaned by mopping, sweeping with a soft bristled broom, or vacuumed with a suction only vacuum. Soap and water works perfectly well. Most any cleaning solution can be used, we like Simple Green, diluted form, but any mild disinfectant should be fine.
Bleach can cause fading so either dilute very heavily and test on an area first. We do not recommend using bleach.
Taking a little bit of care with these mats, they can last a lifetime.
Suction vacuum only. due to the construction of the fibrous weave, beater brush vacuums and cleaning with water and such can be detrimental. This can be a durable carpet, however it is not a commercial grade product.
Simple soap and water or suction vacuum. Avoid chemicals due to the wood grain pattern applied to the foam. A diluted or very mild disinfectant may be used if necessary. Apply to a small section to try before you apply to an entire floor.
Please contact us with other questions.
Take the mats out of the boxes, lay them out and press the teeth together. They will not separate under normal and even very aggressive use.
Typically no adhesive or other steps are needed for this product. If you are putting this in the middle of a room, the product may shift a little if you are doing aggressive actions on them. Much like would happen with any rug or mat freely located in a room. Cut to fit as needed with a razor knife.
PREMIUM 3/8" MULTI-USE
Most installation simply require laying the product down and connecting the sides like a very simple puzzle. Most people also use the textured side up, but the back can be used if desired. The border pieces snap on just like the main tiles. The mats can also be cut to fit easily with a razor knife or even sharp scissors. Over a many tile span, there will be a small loss in size due to the overlap of the teeth. If you are needing to cover an exact dimension, ensure you are buying more and cutting to fit.
In some cases we recommend duct tape on the back of the seams to provide additional rigidity to the product, for example in some martial arts application where people are being very aggressive on the mats. Sometimes an adhesive is recommended like GOOP or Liquid Nails to affix tiles to the ground when more permanence and low shift are required.
Gluing is required if your application entails a great deal of aggressive activity, a large area, or if you are installing in a wall-to-wall location.
Recommended Gluing Technique:
The best installation is to get buckets of adhesive, like Liquid Nails, and trowel it on like the normal setting of tiles. Do not glue the teeth area in case you need to pull up a tile later. Cut to fit as needed with a razor knife.
Secondary Gluing method:
1. Glue a large square on the back, do not glue the teeth
2. Glue an X from corner to corner, ensure the bead of glue is no less than 1/4" - 3/8"
3. Install mat on floor and allow adhesive to dry 24 hours before using
Using this method allows for full coverage, stability, and ease of replacement if necessary
Our multi-purpose flooring product is very durable and cost effective. It usually meets the requirements of at least 95% of what most people are looking for in a floor covering for exercise, safety, floor protection, etc. This is a very industrious product but not industrial. The industrial version of this product costs about 5-10 times.
We stand behind the product and can commit to delivering the highest quality product to you. Just make sure the product meets your needs. We are here to consult with you, give us a call!
Please contact us with other questions.
Highest quality available on the market
- Parts 1, 2, & 3
ASTM E84, NFPA 255, UL 723
Test Results & Certifications
OUR PRODUCTS ARE CERTIFIED BY INDEPENDENT TESTING FACILITIES TO BE FREE OF
LEAD, LATEX, FORMAMIDE, AND PHTHALATES.
CLICK EACH LINK TO DOWNLOAD THE OFFICIAL RESULTS